For NGFF B/M-key or B-Key SSD, You need to connect the SATA cable to Motherboard SATA Port. For NGFF M-key NVME SSD, You need to connect the PCI-E to Motherboard. Powered from PCI-E port for three SSDs. no need extral power. Support Type 2230/2242/2260/2280 type M.2 SSD and MSATA SSD. System requirement: Motherboard: Z97 or later and Windows 10 or later.
USB 3.0 to 17+7pin SSD Hard Drive for 2012 Macbook Air A1465 A1466 Pro A1425 HDD
Connects to a PCIe 3.0 x4 slot with the 22+34 pin connector. Limited by the thickness of the A1708 notebook, this riser card only supports the Key M NVME SSD with 2230 2240 length single-sided chip particles. As long as it is 2230 or 2242 length M.2 of the NVME protocol all can be used. Compatible with MacBookPro13,1 (Late 2016) and MacBookPro14,1 (Mid 2017) Non-Touch Bar Models only. This NVMe SSD convert adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVMe SSD.
Work for Motherboard and fits into any USB 3.0 header. It can be inserted directly and requires no additional attachments. The converter thus provides a full-fledged USB 3.1 port. The USB 3.1 port of a housing can be supplied with USB 3.1 without a suitable mainboard. USB 3.1 Front Panel Header & USB 2.0 Socket to PCI-E Express Card Adapter.
This is for a multiplier, one connect to motherboard 9pin(10pin) USB connection, split to 4x 9-Pin(10-pin) USB Connectioins. Port Multiplier version: 1 to 4 Connector (s) B: 4 x 9 Pin USB 2.0 Female Double chipset included, works well and stable. USB cable length is about 30cm
High speed USB 3.0 supports transfer rates up to 5 Gbps, compatible with original USB system, peripherals and cables, backward compatible with USB 2.0 /1.1. USB interface can offer +5V / 2A current for external devices' power supply, 4Pin molex power interface can also supply power for devices, ensuring sufficient power supply Works greatly for Windows XP or later Internal 19 Pin connection for connects internal devices such as front USB port
Supports M-key M.2 NGFF NVMe protocol SSD to PCIe 3.0 X4 adapter card Speed and other properties are unchanged, only the table conversion interface Support type 2230/2242/2260/2280 type M.2 card size No software drivers are required System requirements: Windows 10 or higher
Support Ultra ATA 133 hard drive, and support Ultra ATA 100/66/33 standard. Support more than 137 GB capacity hard disk (48-bit LBA mode). Supports one internal and one external SATA II interfaces with transfer rates up to 3Gb /s. Support SATA 1.0 standard. 256 bytes FIFO port for quick read / write operation
Applicable to a variety of computer motherboards. motherboards just need with a Type-A USB interface. Use for windows x86/x64 system. include winxp, win7, win8, win10 ect. Need to install the driver to compatible with a variety of motherboards. With Desktop software, It can precise monitoring the program as your need. Better than no software version. Reboot timeout time 10-1270 seconds. You can set up it as your need.
USB 3.1 a super fast and high-capacity data transfer solution. Compliant with USB 3.1 specification. Compatible with USB 3.0, 2.0 & 1.1 specification. Compliant with PCI-Express specification revision 2.0x2X. Stable and reliable ASMEDIA Chipset ASM1142.
Allows the users to use the standard M.2 SSD SATA on regular SATA desktop or laptop Transparent to the operating system and does not require any software drivers The product only support M.2 NGFF (SATA) SSD to 2.5" SATA Data transfer speed and other properties will not be effected by conversion interface It can fixed on the chassis shell of most desktop computers, does not need require auxiliary fixed bracket
A super fast and high-capacity data transfer solution. Compliant with Single-Lane (x1) PCI Express specification revision 1.0. Supports two independent SATA 3.0 channels. (Supports 2 SATA devices at the same time.) Supports data transmission speeds: up to 6.0Gbps, 3.0Gbps, 1.5Gbps Extended Interface: 2 SATA II Interface + 2 ESATA (by jumper switching)
It's both backwards SATA II 3.0Gbps and SATA 1.5Gbps. The speed and other properties is not changed, only form conversion interface, because such transformation does not need through the integrated circuit chip. You can connect it to laptop or desktop, without any driver. The product only supports mSATA Mini PCIE SSD, it does not support SATA Mini PCIE SSD and PATA Mini PCIE SSD. Stable, faster, Stronger compatibility
2 Ports COM 9-Pin Serial RS232 PCI-E PCI Express Card Adapter High Speed Compliant with Single-Lane (x1) PCI-Express specification revision 2.0. Driver support for M Windows 98SE / Me / NT4.0 / 2000/ XP / Server 2003 / Vista/ 7 / 8 /, Linux, DOS. Compatible with Standard 16C550 UART with 16-Byte Transmit-Receive FIFO. Supports up to 1Mbytes/sec transfer rate.
Easy plug and play installation Automatically selects I/O address Single-lane (x1) PCI Express throughout rate up to 5Gbps Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed (480Mbps) / Super-speed (5Gbps) Supports Microsoft Windows XP / Vista / 7 / 8 / 10
Provides audio fidelity that rivals movie theatres with 46-channel digital sound Customize Internet audio with the power and surround sound of EAX audio technology Enjoy compelling 3D audio and 4-channel sound on multiple speaker series HRTF-base 3D positional audio, supporting DirectSound 3D, EAX and A3D interfaces Supports multi-speaker output to 4/6 speakers
Supports all USB compliant data transfer type as follows: Control / Bulk / Interrupt / Isochronous transfer Supports PCI Express Card Electromechanical Specification Revision 2.0 Supports PCI Bus Power Management Interface Specification revision 1.2 Each USB Port supplies maximum +5V/900ma power output to USB device. Support Windows XP / Vista (32/64 bit) /Win7 (32/64 bit) Win 8
Compliant with PCI Express Base Specification 1.0a Compliant with IEEE 1394-1995, 1394a-2000 and OHCI 1.1 Standards PCI Express 1-lane(x1) FireWire adapters works with PCI Express slots with different lane width Installs in any available PCI Express slot and supports data transfer rates up to 400Mbps Three external and One internal 6-pin FireWire(1394a) ports to support DV camcorders, hard disk, removable drives, scanner, digital cameras and other FireWire audio/video devices
Supports the following speed data rate as follows:Low-speed (1.5 Mbps) / Full-speed (12 Mbps) / High-speed (480 Mbps) / Super-speed (5 Gbps) Supports 2 downstream ports for all speeds Supports all USB compliant data transfer type as follows: Control / Bulk / Interrupt / Isochronous transfer Based upon PCI Express Base Specification 2.0 Supports PCI Express Card Electromechanical Specification Revision 2.0
Plug and Play, automatically assigned IRQ and I / O address. You can manually change the port number of additional serial port card. Support PCI I / Q shared. Consistent with PCI Rev2.1 Agreement. Consistent with standard input and output of 16C550 UART with 16 byte transmit-receive FIFO.
Durable material for long working life Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives, or Optical Drive. Easy and Convenient to use. Provides 4 independent channels to connect up to 4 Serial ATA hard disk devices Supports 48-bit LBA (Large Disk), hard drives larger than 137GB
Support Standard Parallel Port (SPP), Enhanced Parallel Port (EPP) & Enhanced CapabilityPort (ECP), Data transfer rate support up to 1.5MB/Sec. (Parallel Port) Compatible with Standard 16C550 UART with 16-Byte Transmit-Receive FIFO Support Plug and Play SPP, PS2, EPP, ECP Compatible IEEE 1284 Printer Port
This Card for Desktop PCs and Macs is the 4-port FireWire host adapter for connecting today's fastest peripherals to your computer. It makes adding FireWire devices to your computer a snap. Just use the thin, flexible FireWire cables and small single connectors to link together a daisy-chained system in no time at all. Capture digital video and connect to your favourite FireWire peripherals. Take advantage of FireWire peripherals - is OHCI-compliant, supporting data speed up to 400 Megabits per second
The adapter can covert the NGFF M-key SSD to the 12+16pin 2014 2015 Macbook SSD. Compatible with 2013 Macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD 2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD Compatible with 2013 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD 2014 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD Compatible with 2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD 2015 MacBook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD Compatible with 2015 MacBook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD
DVI-I 24+5 Male To VGA 15 Pin Female Converter Adapter for LCD HDTV screen Allows you to convert a standard DVI-I port into a second VGA port Connect any VGA monitor with HD15 male connector to any computer with DVI-I port Complete with thumb screws and barrel nuts to make sure of a secure connection Ideal for people who want to use the dual monitors for their work/game environment