5 Port 10/100Mbps Fast Ethernet Switch HUB Desktop Network Adapter
Description:
5 port Embedded 10/100 PHY Switch Controller
Support 5 100BaseTX or 4 100Base TX + 1 FX
Support Auto MDI-MDIX function
Power Management Tool: APS, auto-power saving while Link-off, IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps
Light Traffic Power Saving: PWD, force-off power saving
Features:
Support Auto Factory Test, Single Power 3.3V supply
Built in Vcore Regulator, Two Priority queues per port
Support 802.1p & DiffServ based QoS
QoS: Port base,802.1p, IP DiffServ IPV4/IPV6,TCP/UDP port number, Pins configure ports priority (VIP port)
Support max forwarding packet length 1552/1536 bytes option
Support port mirror function; Support 1k MAC address; Support broadcast storm protection; Support port trunking (LACP)
Support 16 VLAN (IEEE Std 802.1q): Port-based/Tagged-based VLAN; Support insert, remove tag
Built-in 50 ohm resistors for simplifying BOM, 85nm Process, Package and operation temperature, IP175G: 48 Pin QFN(6×6), 0~70℃
Specifications:
Port number: 5 port 10/100M Auto MDI-MDIX RJ45
Standard IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3az
Network Media: 10Base-T,cat3 or above UTP,10Base-Tx,cat5 UTP
Data Rate: 10/100M
Forwarding Rate: 10 Mbps / 14,880 pps ,100 Mbps / 148,800 pps
LED Indicator: 10/100Mbps(Link/Act), Power
Dimension: 81 x 51 x 21mm
Power Input: DC5V/500mA
Power Consumption: Max1.5W
Environment:
Operating Temperature: 0 ℃-40 ℃
Relative Humidity: 10%-90%(non-condensing)
Storage Temperature: -40℃-70℃
Relative Humidity: 5%-90%(non-condensing)
Dimension: 8x5x2cm
Package Included:
1 x Network Switch
1 x Power Adapter
